Shure Condenser Lavalier Omni Mic Omni Directional with Preamp, Tie Clip,Screen
CAMCOR ITEM NO. SHUMX183 | MFG. PART NO. MX183
Product Highlights
Provides low handling noise. Pickup angle = 360.Models MX183, MX184, and MX185 are wired lavalier electret condenser microphones designed for speech and vocal pickup, general purpose sound ... More
Is This Item Right For Me? - Ask Our Experts
California Residents:
WARNING: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information.
Models MX183, MX184, and MX185 are wired lavalier electret condenser microphones designed for speech and vocal pickup, general purpose sound reinforcement, recording, and remote monitoring applications. They can be clipped to neckties, lapels, and other articles of clothing. Interchangeable cartridges make it possible to easily reconfigure microphone coverage as the need arises.
Product Features
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal choice for each application
Rotatable tie-clip that pivots in 90 increments for placement flexibility
Supplied snap-fit foam windscreen that controls breath noise and stays on securely
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied dual tie clip holds two microphones for dual miking applications
Open Circuit Sensitivity (at 1 kHz, ref. 1V/Pascal*)
27.5 dB (42.2 mV) 1 Pascal = 94 dB SPL
Max SPL (1kHz at 1%THD, 1 kO load)
116.7 dB
Equivalent Output Noise (A-weighted)
20.5 dB
Signal to Noise Ratio (referenced at 94 dB SPL)
73.5 dB
Dynamic Range at 1 k load
96.2 dB
Power Requirements
11 to 52 Vdc phantom, 2.0 mA
Common Mode Rejection
45.0 dB minimum
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
Environmental Conditions
Operating Temperature Range: -18° to 57° C (0° to 135° F) Storage Temperature Range: -29° to 74° C (-20° to 165° F)
Cable
Shielded 1.2 meter (4 ft.) cable terminated with a 4-Pin Female Mini Connector (TA4F)
Certification
Eligible to bear CE Marking. Conforms to European EMC Directive 89/336/EEC. Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments.