CHIEF Projector Mount Panasonic PTL at Camcor.com

CHIEF Projector Mount Panasonic PTL
Limited Stock - order today!
Camcor Item No.	CHMRPA501
Mfg. Part No.	RPA501

Chief's RPA Series Inverted Ceiling Mount with the exclusive All-Points™ Security System is the top-selling projector mount in the industry! More RPA Series Mounts are installed in offices, schools and homes than any other mount.

Why is the RPA so popular? Because it gives you everything you need for a quick installation, low-profile look and hassle-free projector maintenance. Also, a winner in the Media & Methods 2003 Awards Portfolio for making a significant contribution to the school market. SLB bracket included when you order!

Features

Low-profile, aesthetic design

Quick projector disconnect/reconnect

Steel-into-steel construction

UL listed for proven strength

Easy installation - no assembly

Independent roll, pitch and yaw adjustments make it easy to precisely register the projector

Disconnect without affecting adjustments

Convenient lamp and filter access

All-Points™ Security System included at no additional cost (not available with all RPA Series Mounts)

Three ceiling mounting methods

Flush mount without disassembly

Allows cables to be routed through the top of the mount without additional accessories

Compatible with a large assortment of accessories to easily overcome a variety of installation challenges

Allows lateral shift by adding the LSB-100 Lateral Shift Accessory

Compatible with the PG-1 Projector Guard™ Security Cage

Allows natural convection ventilation

Specifications

Roll Adjustment	+/- 4 degrees adjustment up or down. Loosen screw, adjust mount and tighten screw to hold adjustment.
Pitch Adjustment	+/- 25 degrees adjustment on each side of the mount. Loosen screw, adjust mount and tighten screw to hold adjustment. Full range of pitch in a flush mount installation.
Yaw Adjustment	360 degrees by turning the mount on the threaded column and securing in place with set screw. 12 degrees yaw possible on flush mount using slots in top of RPA.
Color	Black
Column	1.5" NPT
Weight Capacity	50 lbs.
Three Mounting Methods	1. Flush mount to suitable ceilings using the four corner slots in top of the RPA Mount. The RPA allows you to flush mount without disassembly by providing suitable access for screwdrivers and socket sets. ±25 degrees of pitch when flush mounted. 12 degrees yaw possible on flush mount with slots in top of RPA (Hardware not included). \| 2. 1/4" Threaded Rod using the four corner slots in the top of the RPA. (Threaded Rod not included.) \| 3. 1 1/2" NPT Threaded Extension Column using the threaded opening at the top of the RPA Mount. (Threaded Extension Column not included. See page 20.)
Convenient Lamp and Filter Access	Custom design of most RPA projector brackets provides needed access for: quick lamp changes, easy filter cleaning and proper projector ventilation.
Quick Projector Disconnect/Reconnect	To quickly and easily remove the projector from the ceiling: loosen thumbnuts connecting the SLB bracket to the universal top. Remove projector and SLB from universal top. The universal top retains the registration adjustments. This feature makes projector servicing and maintenance quick and easy by eliminating the need for re-registration. Security wrench included for use when thumbnuts are replaced with All-Points™ Security System hardware.
LSB-100 Lateral Shift Accessory	Often times ceiling structures will not allow the projector to be mounted in exact alignment with the projection screen. The LSB-100 Lateral Shift Accessory saves an abundance of time and hassles in trying to solve this common problem. The LSB-100 allows the projector to be shifted three inches right or left of the installation spot (5 3/4 inches on projectors under 15 lbs.). Also use the LSB-100 to easily accommodate different lens placement when projectors are replaced in existing installations. Compatible with all RPA and UPC Series Mounts, and maintains quick disconnect feature. Includes All-Points™ Security System hardware.